How to set up Wireless Security for Thomson TCW770

  1. Open a Browser type http:192.168.1.1 in the address bar then enter Username = admin / Password = password and click OK
  2. Click Wireless > Radio > select enable-disable Wireless at Interface
  3. WEP setting click Wireless > Primary Network set up as follows:
    • Network Name (SSID) > Wireless name, which is true_homewifi_xxxxx by Default and can be found from the sticker on Modem
    • WEP Encryption >True’s Default is WEP (128-bit) can be found from the sticker on Modem
    • Click Apply to Save
  4. WPA setting click Wireless > Primary Network set up as follows:
    • Network Name (SSID) > Wireless name, which is true_homewifi_xxxxx by Default and can be found from the sticker on Modem
    • WEP Encryption > Disable
    • WPA-PSK >  Enable
    • WPA/WPA2 Encryption > AES
    • WPA Pre-Share Key > enter the password to use Wireless
    • Click Apply to Save
  5. WPA2 setting click Wireless > Primary Network set up as follows:
    • Network Name (SSID) > Wireless name, which is true_homewifi_xxxxx by Default and can be found from the sticker on Modem
    • WEP Encryption and WPA-PSK > Disable
    • WPA2-PSK > Enable
    • WPA/WPA2 Encryption > AES
    • WPA Pre-Share Key > enter the password to use Wireless
    • Click Apply to Save 
  6. WPS setting > Automatic Security Configuration, select WPS and click Enable to use WPS function as shown

Was this helpful?

Very bad Very Good