Set Access Point mode for AP Humax Quantum T3A

  1. Enter AP Setting from a browser
    • If not yet connect main Router, type 192.168.1.1 or http://dearmyrouter.net
    • If connect main Gateway Router 192.168.1.1, type 192.168.0.1
    • admin / Password: 0557
  2. After Login, a Wizard page for normal setting will appear, select [Advanced Setup]
  3. Simple setup via Wizard page
    • [WAN Setting], [Connection Type] select [Dynamic IP]
    • [Wireless 5GHz]
      • Radio On/Off : Enable
      • Network Name (SSID) : enter desired network name
      • Security : select security type
      • Password : enter the password (show in dots, to show the password, press Eye signา
    • [Wireless 2.4GHz]
      • Radio On/Off : Enable
      • Network Name (SSID) : enter desired network name
      • Security : select security type
      • Password : enter the password (show in dots, to show the password, press Eye sign)
      • Once completed, press [Apply]
  4. Connection Status
  5. On left menu, select [Network] > [WAN]
    1. Connection Type : select [Dynamic IP]
    2. Do not edit anything, then press [Apply]
Download File

Was this helpful?

Very bad Very Good