Set up Port Forwarding for ZTE F612C

  1. Open a Browser e.g. IE, Chrome and type http://192.168.1.1 then press Enter
    • Username = admin
    • Password = password
    • Press Login
  2. Go to Application > Port Forwarding, click Enable and set up as follows:
    • Name : enter name to forward port
    • Protocol : select using Service
    • WAN Host Start IP Address : 0.0.0.0 or leave it blank (because WAN IP will change every 24 hours per cycle)
    • WAN Host End IP Address : 0.0.0.0 or leave it blank (because WAN IP will change every 24 hours per cycle)
    • WAN Connection : select the same name that’s shown while using the internet
    • WAN Start Port : enter start port refer to Service that want to use
    • WAN End Port : enter end port refer to Service that want to use
    • LAN Host IP Address : type IP address of device to forward Port 
    • LAN Host Start Port : may enter the same as WAN Start Port or enter other as desired
    • LAN Host End Port : may enter the same as WAN End Port or enter other as desired
  3. Afterward data will be shown in below table
    • Edit data : click Pencil sign
    • Delete data : click Bin sign
Download File

Was this helpful?

Very bad Very Good