Set up Wireless for AP Humax Quantum T3AT

  1. To access AP setup page from a browser, type 192.168.2.1 or dearmyrouter.net and press Enter, ID = admin / Password = password then press Login
  2. On the top, select Advanced Setup
  3. It'll lead to Home page
  4. Go to Wireless 2.4 GHz > Primary Network
    • On/Off:  turn On-Off Wireless
    • Network Name (SSID) : enter Wireless name
    • 802.11 Mode : set up Wireless technology as desired (802.11b/g/n recommended)
    • Hide SSID : to hide or display Wireless name
    • Channel: set Wireless Channel (AUTO recommended)
    • Bandwidth : set Wireless Bandwidth (AUTO recommended)
    • Security : set Wireless security type
    • WPA-PSK, WPA2-PSK, WPA/WPA2-PSK : enter 8 digits up
    • WEP- Open system, WEP Shared key : enter 5 or 10 digits
    • Encryption : select Wireless encryption
    • Password : set the password according to the selected security type
    • Then press APPLY
  5. Go to Wireless 5 GHz > Primary Network
    • On/Off:  turn On-Off Wireless
    • Network Name (SSID) : enter Wireless name
    • 802.11 Mode : set up Wireless technology as desired (802.11a/n/ac recommended)
    • Hide SSID : to hide or display Wireless name
    • Channel: set Wireless Channel (AUTO recommended)
    • Bandwidth : set Wireless Bandwidth (AUTO recommended)
    • Security : set Wireless security type
    • WPA-PSK, WPA2-PSK, WPA/WPA2-PSK : enter 8 digits up
    • WEP-Open system, WEP Shared key : enter 5 or 10 digits
    • Encryption : select Wireless encryption
    • Password : set the password according to the selected security type
    • Then press APPLY

Was this helpful?

Very bad Very Good

Related topics

Set up Access Point for AP Humax Quantum T3AT Pictures and Details of AP Humax Quantum T3AT