Set up Repeater (Extender) for AP Humax Quantum T3ATv2

  1. Slide a switch on AP router to EXTENDER Mode and AP will reboot itself 1 time
  2. To access AP setup page from a browser, type 192.168.2.1 or dearmyrouter.net  then press Enter , ID = admin / Password = password  then enter the letters as shown to confirm the access and click Login
  3. After logging in, it’ll lead to Welcome to Extended Network : to set up Repeater (Extender) can be done at Easy Setup and Advanced Setup
  4. Easy Setup : at Welcome to Extended Network > click Other Products > Next
  5. At Extender Setting : system will show SSID or network that AP can search
  6. Choose preferred SSID and enter the password of that network then press Next
  7. Enter the network name that AP will distribute network and Password then press Done
  8. Wait for the system to restart around 1 minute
  9. Back to Login page again to check connection status
  10. At Home page, a globe sign will show a green check mark
  11. Advanced Setup : Welcome to Extended Network > select Advanced Setup
  12. Home page
  13. Go to Wireless Network, select the frequency to repeat network (example: choose Wireless 5GHz) > Extender Setting > wait a moment all SSID names will appear 
  14. Select preferred SSID and enter the password of that network then press Connect
  15. Wait for the system to restart around 1 minute
  16. Check connection status by going to Home page, notice a globe sign it will show a green check mark
Download File

Was this helpful?

Very bad Very Good