Set up Wireless on AP TP-Link Archer C3150

  1. Type http://tplinkwifi.net or http://192.168.0.1  and log in by
    • First setup, to Log in with New Password > press Let’s Get Start
    • After first setup, enter the Password that has been set in 1.1 > press Log in
  2. Can set up at Basic and Advanced menu
  3. Basic : Basic Status > Wireless 
    • 2.4 GHz Wireless Network : choose Enable
    • Wireless Network Name (SSID) : enter name
    • Password : set the password contains 8 characters up
    • 5 GHz Wireless Network : choose Enable
    • Wireless Network Name (SSID) : enter name
    • Password : set the password contains 8 characters up
    • press Save
  4. Advanced : Advanced Status > Wireless > Wireless Settings 
    • Smart Connect : choose Enable, AP will share 1 name only and choose band for connected device to get 2.4GHz or 5GHz
    • Wireless Network Name (SSID) : enter preferred name
    • Security : (None, WPA/WPA2-Personal, WPA/WPA2-Enterprise, WEP)
    • once completed, press SAVE
    • Disable Smart Connect : when Smart Connect is disabled, you can name 2.4 GHz and 5 GHz separately as follows:
    • 2.4 GHz
      • Wireless Radio : choose Enable
      • Wireless Network Name (SSID) : enter preferred name
      • Security : (None, WPA/WPA2-Personal, WPA/WPA2-Enterprise, WEP)
      • Password : set the password
      • Mode : choose preferred mode (default is all)
      • Channel : choose preferred channel (default is Auto)
      • press Save
    • 5 GHz
      • Wireless Radio : choose Enable
      • Wireless Network Name (SSID) : enter preferred name
      • Security : (None, WPA/WPA2-Personal, WPA/WPA2-Enterprise, WEP)
      • Password : set the password
      • Mode : choose preferred mode (default is all)
      • Channel : choose preferred channel (default is Auto)
      • press Save

Was this helpful?

Very bad Very Good

Related topics

Set up Access Point Mode on AP TP-Link Archer C3150 Pictures and Details of AP TP-Link Archer C3150