Set up Wireless on AP FiberHome SR120-A

  1. Open a Browser, type 192.168.2.1 and press Enter (User = admin, Password = enter letters as shown below)
  2. Status page, choose Wi-Fi
  3. Set up Wi-Fi : 
  4. General setting : set different name and different code for 2.4 GHz and 5 GHz  
    or set all to be the same as follows:
    • SSID Choice : select SSID1 for 2.4 GHz
      • 2.4G Wi-Fi : turn on
      • Name : enter Wi-Fi name as desired
      • Encryption : select Wireless encryption
      • Wi-Fi Password : enter Wi-Fi password as desired
    • SSID Choice: select SSID5 for 5 GHz
      • 5G Wi-Fi : turn on
      • Name : enter Wi-Fi name as desired
      • Encryption : select Wireless encryption
      • Wi-Fi Password : enter Wi-Fi password as desired
    • When completed, press Save
  5. Dual Band Optimization : set up both 2.4 GHz and 5 GHz are all the same setting both network name and password, whereas AP will optimize band for the connected device. At Wi-Fi page, click enable Dual Band Optimization (enable = blue, disable = grey)
    • Wi-Fi : click turn on a button 
    • Name : enter Wi-Fi name as desired
    • Encryption : select Wireless encryption
    • Wi-Fi Password : enter Wi-Fi password as desired
    • When completed, press Save
Download File

Was this helpful?

Very bad Very Good