Port Forwarding on ZTE F688

  1. Type 192.168.1.1 at Browser then press Enter
    • Username = admin
    • Password = enter letters shown in Default Router Password (each ZTE model will vary)
    • press Login
  2. Go to Internet > Security > Port Forwarding
  3. Set up as follows:
    • New Item : choose On to enable this Profile
    • Name : name the Profile e.g. “DVR”
    • Protocol : select Protocol, if not sure, select TCP And UDP
    • WAN Connection : Auto
    • LAN Host : enter IP Address of device to forward Port
    • WAN Port : enter Port of device to forward Port (if use True DDNS, enter Port of True DDNS)
    • LAN Host Port : enter Port of device to forward Port (if do not use True DDNS, at WAN Port and LAN Host Port, enter the same parameter)
    • When finished, press Apply
    • If wish to add Port Forwarding, press Create New Item
  4. Press Apply, setup information as follows:
    • Profile name will be changed to the name that’s been set
    • “Your data has been stored” message
    • To delete Profile, click a bin sign
    • When finished, press Apply

Was this helpful?

Very bad Very Good