Set Mac Filter on ZTE F688

  1. Type at Browser then press Enter
    • Username = admin
    • Password = enter letters shown in Default Router Password (each ZTE model will vary)
    • Press Login
  2. At Status > Local Network
  3. Go to WLAN
  4. And then WLAN Advanced
  5. Set up as follows:
    • SSID : set name
    • SSID1 : 2.4 GHz
    • SSID5 : 5 GHz
    • Mode : choose preferred Mode
    • No Filter : not set Filter
    • Black List : not allow to use
    • White List : allow to use
    • press Apply
  6. Select Access Control-Rule Configuration
  7. Set up as follows:
    • Name : enter name
    • SSID : select SSID 
    • MAC Address  : enter MAC Address of allow and not allow device
    • press Apply

Was this helpful?

Very bad Very Good

Related topics

How to fix Problems when configure ZTE F688 to use True DDNS with CCTV Set up ZTE F688 to use True DDNS with CCTV Check Client List connected to ZTE F688 Block Website on ZTE F688 Check Surrounding Wi-Fi Signal for ZTE F688