Set up Wireless for AP Humax Quantum T3ATv2

Check AP mode before setting

  • on the left of AP, select mode Router
  • if select Extender, it'll make network name disappear


  1. To access AP setup page from a browser, type 192.168.2.1 or dearmyrouter.net then press Enter, ID = admin / Password = password  Enter the letters as shown to access the system
  2. At Welcome to QUANTUM T3ATv2 : select Advanced Setup
  3. It'll lead to Home
  4. At Wireless 2.4 GHz : go to Wireless 2.4 GHz > Primary Network
    • ​On/Off : turn On-Off Wireless
    • Network Name (SSID) : enter Wireless name
    • 802.11 Mode : set up Wireless technology as desired (802.11b/g/n recommended)
    • Country : select Thailand
    • Hide SSID : to hide or display Wireless name
    • Channel : set Wireless Channel (AUTO recommended)
    • Bandwidth : set Wireless Bandwidth (AUTO recommended)
    • Security : set up Wireless security type
    • WPA-PSK, WPA2-PSK, WPA/WPA2-PSK : enter 8 digits up
    • WEP-Open System, WEP Shared key : enter 5 or 10 digits
    • Encryption : select Wireless encryption
    • Password : set the password according to the selected security type
    • Press APPLY
  5. At Wireless 5 GHz : go to Wireless 5 GHz > Primary Network
    • ​On/Off : turn On-Off Wireless
    • Network Name (SSID) : enter Wireless name
    • 802.11 Mode : set up Wireless technology as desired (802.11a/n/ac recommended)
    • Country : select Thailand
    • Hide SSID : to hide or display Wireless name
    • Channel : set Wireless Channel (AUTO recommended)
    • Bandwidth : set Wireless Bandwidth (AUTO recommended)
    • Security : set up Wireless security type
    • WPA-PSK, WPA2-PSK, WPA/WPA2-PSK : enter 8 digits up
    • WEP-Open System, WEP Shared key : enter 5 or 10 digits
    • Encryption : select Wireless encryption
    • Password : set the password according to the selected security type
    • Press APPLY
Download File

Was this helpful?

Very bad Very Good