Set up Wireless on AP TurboSpeed WR6221-T
- Type 192.168.2.1 in URL, enter User = admin / Password = as per below picture (if it’s not clear, click at picture again, its style will be changed but always the same code)
- Wireless Quick Setup : after Logging in, you’ll find Quick Setup that you can set up Wireless
- 2.4G SSID / 5G SSID : Wireless name of 2.4G and 5G band
- Security : if don’t want to enter the password, choose Disable, if want to, choose Enable
- Password : contain 8 characters up (Default is WPA2-PSK), you can click at eye symbol to view the password
- Wireless Advanced Setup : after Logging in, click Advanced at top right corner
- Wireless 2.4G: go to Wireless 2.4G and set up as follows:
- Wireless Settings
- Wireless Status : choose Enable or Disable
- Radio Band : choose as per supporting device
- SSID : enter Wireless name
- SSID Broadcast : choose Disable when want to hide Wireless name (if Disable is chosen, WPS will not work), if don’t want to hide, choose Enable
- Channel : default is Auto. When AP is turned off-on, it will scan for the best channel
- AP Security Settings > Authentication Type > choose the preferred type
- Wireless 5G : go to Wireless 5G and set up as follows:
- Wireless Settings
- Wireless Status : choose Enable or Disable
- Radio Band : choose as per supporting device
- SSID : enter Wireless name
- SSID Broadcast : choose Disable when want to hide Wireless name (if Disable is chosen, WPS will not work), if don’t want to hide, choose Enable
- Channel : default is Auto. When AP is turned off-on, it will scan for the best channel
- AP Security Settings > Authentication Type > choose the preferred type