Set up Wi-Fi on T3 ST-244F

  1. Type 192.168.1.1 and press Enter, User = admin /Password = enter letters shown below, and press Login
  2. At Status, select WLAN
  3. WLAN : 5GHz
    • Basic Settings
      • Disable WLAN Interface : turn off Wi-Fi
      • Band: select Band to use, by default is 5GHz (A+N+AC)
      • SSID : Wi-Fi name
      • Channel Width : select channel width, by default is AUTO
      • Channel Number : select Wi-Fi channel, by default is AUTO
      • Radio Power : by default is Standard
      • Associated Clients : show active WLAN clients connected to Wi-Fi 5GHz
    • Security
      • Encryption : select Wi-Fi encryption type, by default is WPA/WPA2 Mixed
      • WPA Cipher Suite & WPA2 Cipher Suite : select Wi-Fi encryption type
      • Pre-Shared Key : set Wi-Fi password
  4. WLAN : 2.4GHz
    • Basic Settings
      • Disable WLAN Interface : turn off Wi-Fi
      • Band : select Band to use, by default is 2.4GHz (B+G+N)
      • SSID : Wi-Fi name
      • Channel Width : select channel width, by default is 20MHz
      • Channel Number : select Wi-Fi channel, by default is AUTO
      • Radio Power : by default is Standard
      • Associated Clients : show active WLAN clients connected to Wi-Fi 2.4GHz
    • Security
      • Encryption : select Wi-Fi encryption type, by default is WPA/WPA2 Mixed
      • WPA Cipher Suite & WPA2 Cipher Suite : select Wi-Fi encryption type
      • Pre-Shared Key : set Wi-Fi password

Was this helpful?

Very bad Very Good