Set up Repeater (Extender) for AP Humax Quantum T3A
- To access AP setup page from a browser, if not yet connect to main router, type 192.168.1.1 or http://dearmyrouter.net If connect to main Router which is Gateway 192.168.1.1, type 192.168.0.1 or http://dearmyrouter.net , ID: admin / Password: enter last 4 digits of serial number
- At Easy Setup, select Advanced Setup
- Select Management
- And then Mode
- Select Repeater Mode and then press Apply
- Wait for system to restart around 1 minute
- A Browser will redirect to Login page again or type dearmyextender.net , enter ID: admin / Password: enter last 4 digits of serial number Remarks : if change to Repeater mode, to access Setup Page, type dearmyextender.net only, can't access page by using IP Address
- At Easy Setup, select Other Products and then press Next
- Wait a moment, system will show SSID or Wi-Fi network that AP can search
- Click preferred SSID and enter the password of that network
- Enter the network name which AP will extend network and Password then press Finish
- Wait for system to restart around 1 minute
- A Browser will redirect to Login page again, enter ID: admin / Password: enter last 4 digits of serial number
- To check status, at Home page a globe sign will show a green check and “Connected”
- Click AP Sign (next to Globe sign), it’ll show IP address of main Router