Set up LAN on AP TurboSpeed WR6221-T

  1. Type in URL, enter User = admin / Password = as per below picture (if it’s not clear, click at picture again, its style will be changed but always the same code)
  2. After Logging in, click Advanced > Status
  3. Network > LAN and set up as follows:
    • IP Address: IP Address of AP
    • Subnet Mask : Subnet Mask of AP
    • DHCP Status : set up to enable/ disable DHCP
    • Start IP Address : start IP Address 
    • End IP Address : end IP Address
    • Lease Time :duration to clear DHCP and share new IP Address
    • DHCP Client List : details of connected device to AP

Was this helpful?

Very bad Very Good