Set up DMZ on ZTE F688

  1. Type at Browser then press Enter
    • Username = admin
    • Password = enter letters shown in Default Router Password (each ZTE model will vary)
    • Press Login
  2. Set up as follows:  (DMZ is to forward Port to 1 IP Address to make it able to use every Port)
    • Go to Internet
    • On the left, select Security
    • Select DMZ
    • DMZ : select On to enable automatic Port Forwarding
    • WAN Connection : select Auto
    • LAN Host : enter IP Address of device to forward Port
    • Press Apply
  3. After pressing Apply there’ll be a message “Your data have been stored!”

Was this helpful?

Very bad Very Good