Set up Wireless for Xplor
Set up Wireelss 5G
- Type 192.168.1.1 on Browser and enter Username = admin / Password = password then press Login
- Basic Settings : go to WLAN > wlan0(5GHz) > Basic Settings
- Disable WLAN Interface : uncheck (if want to turn off WiFi, tick a check mark)
- Band : select Band type
- SSID : enter WiFi SSID
- Channel Number : choose preferred Channel
- Radio Power(%) : choose from high to low
- Once finished, press Apply Changes
- Show Active WLAN Clients button, this will show client list connected to Wi-Fi
- Security : go to WLAN > wlan0(5GHz) > Security
- None
- WEP
- WPA
- WPA2
- WPA2 Mixed
- WLAN Access Control : go to WLAN > wlan0(5GHz) > Access Control
- Mode : select Deny Listed
- Mac Address : enter Mac Address of device to block the access
- WPS
- Disable WPS : default setting is disable, to use it, remove a check mark
- Self-PIN Number : PIN for entering at connected device
Set up Wireelss 2.4G
- Type 192.168.1.1 on Browser and enter Username = admin / Password = password then press Login
- Basic Settings : go to WLAN > wlan1(2.4GHz) > Basic Settings
- Disable WLAN Interface : uncheck (if want to turn off WiFi, tick a check mark)
- Band : select Band type
- SSID : enter WiFi SSID
- Channel Number : choose preferred Channel
- Radio Power(%) : choose from high to low
- Once finished, press Apply Changes
- Show Active WLAN Clients button, this will show client list connected to Wi-Fi
- Security : go to WLAN > wlan1(2.4GHz) > Security
- None
- WEP
- WPA
- WPA2
- WPA2 Mixed
- WLAN Access Control : go to WLAN > wlan1(2.4GHz) > Access Control
- Mode : choose Deny Listed
- Mac Address : enter Mac Address of device to block the access
- WPS
- Disable WPS : default setting is disable, to use it, remove a check mark
- Self-PIN Number : PIN for entering at connected device
- Once finished, press Apply