Forward Port on AP D-Link DIR-895L

  1. Open a Browser, type 192.168.0.1 > do not enter the password > press Login
  2. Features > Port Forwarding
  3. Click Add Rules
  4. Set up as follows:
    • Name : enter preferred name
    • Local IP : enter IP Address of device to forward Port or choose from a List on the right
    • TCP Port : enter Port that is TCP Protocol
    • UDP Port : enter Port that is UDP Protocol 
    • press Apply **if don’t know what kind of protocol it is, enter the same in both ports**
  5. Back to first page, information will be shown in below table
    • press SAVE 
    • to delete, click Bin sign
  6. Virtual Server : on Port Forwarding page, click Virtual Server , the setting is the same as Port Forwarding but you can identify more values
  7. Click Add Rules
  8. Set up as follows:
    • Name : enter name to forward Port or choose from a List on the right e.g. choose HTTP : Internal Port = 80, HTTPS: Internal Port = 83
    • Local IP : enter IP Address of device to forward Port or choose from a List on the right
    • Protocol : TCP or UDP , if not sure, choose Both
    • External Port : Port that’s shown on device and want Port Forwarding
    • Internal Port : Port that’s shown on device and want Port Forwarding
    • once completed, press Apply
  9. Back to first page, information will be shown in below table​
    • press SAVE 
    • to delete, click Bin sign

Was this helpful?

Very bad Very Good