How to set ZTE ZXV10W300 as Access Point using with Cisco EPC3825

3 Steps to set up equipment

  1. Check Cable Modem for internet connection and IP distribution
  2. Set up ADSL Modem as an Access Point within the same LAN
  3. Connect Cable Modem and ADSL Modem with LAN cable

1st Step Check Cable Modem for internet connection and IP distribution

  1. Test opening a website for normally use internet
  2. Connect LAN from Computer (or Notebook Computer) to LAN port of Cable Modem and open a Web Browser then type 192.168.1.1 and click Enter, Username : admin, Password : password, Click Login
  3. Check Wireless setup menu
    • Wireless Network : Enable
    • Standard Channel :select the channel with least interference, if do not know, select Auto
    • Wireless Network Name (SSID) : create name
    • Click Save Settings
  4. Wireless -> Wireless Security and set up as follows:
    • Wireless Security Mode = WPA2-Personal
    • Encryption = TKIP+AES
    • Pre-Shared Key : enter password
    • Click Save Settings
  5. Go to Setup -> LAN Setup
    • DHCP Server : Enable
    • Click Save Settings

2nd Step Set up ADSL Modem as an Access Point within the same LAN

  1. Reset Factory Default ADSL Modem by press and hold the button at the back of modem for 11 seconds and release
  2. Connect LAN cable from Computer (or Notebook Computer) to LAN port of Cable Modem and open a
    Web Browser and type 192.168.1.1 then click Enter, Username : admin, Password : password, Click Login
  3. Interface Setup -> Wireless
    • Access Point : Activated 
    • Channel : select the channel with least interference, if do not know, select Auto
    • SSID: create the network name as desired (the example is ended with 'EXT' to make it different from Cable Modem)
    • Authentication type = WPA2-PSK
    • Encryption = TKIPAES
    • Pre-shared Key : enter password as desired (should be set similar to Cable Modem)
    • Click SAVE
  4. Interface Setup -> LAN
    • IP Address : 192.168.1.2
    • DHCP : Disabled
    • ​Click SAVE

3rd Step Connect Cable Modem and ADSL Modem with LAN cable

  • Connect ADSL Modem set as an Access Point with LAN cable from LAN slot (or Ethernet) to LAN slot (or Ethernet) of Cable Modem
Download File

Was this helpful?

Very bad Very Good