How to set up Wireless Security for Cisco EPC2325

  1. Open a Browser and enter http://192.168.0.1 in address bar > a Popup page appears
    Username = admin / Password = W2402 > click OK
  2. Setup > Wireless > Basic
  3. Set up as follows:
    • ​Access Point > to turn on Wireless, select Enable
    • Service Set Identifier (SSID) > Wireless name
    • Click Apply to Save
  4. Setup > Wireless > Security
  5. Go down to WEP and set up as follows:
    • ​WEP Encryption > select Security either WEP (64-bit) or WEP (128-bit)
    • Click Apply to Save
  6. Setup > Wireless > Security
  7. Go down to WPA-PSK and set up as follows:
    • ​WEP Encryption > Disable 
    • WPA-PSK > Enable
    • WPA Pre-Share Key > create password for using Wireless
    • Click Apply to Save
  8. Setup > Wireless > Security
  9. Go down to WPA2-PSK and set up as follows:
    • ​WEP Encryption and WPA-PSK > Disable 
    • WPA2-PSK > Enable
    • WPA Pre-Share Key > create password for using Wireless
    • Click Apply to Save
Download File

Was this helpful?

Very bad Very Good