How to Forward Port on on Zyxel P660HN-T1A

  1. Once you’re in 192.168.1.1 and enter “Password”, you will see the menu as shown
  2. Click Network then click NAT
  3. Click Port Forwarding
  4. Select Default Server if there is no Server (general home user not have server)
  5. There are 2 ways to Forward Port:
    1. Click Service Name
      • Select Service Name to be configured (if there is no User Define, go to 2) or b. at the bottom
      • Enter server IP Address
      • Click Add
      • Click Apply
    2. Click Edit (or select the Service Name to be user define)
      • Click at the tiny pencil in the Modify box
      • Place a check mart at Active and fill in the details
      • Click Apply
  6. How to check the configuration : After completing the procedures for configuration, the following table will appear If you’d like to delete the setting, click the trash can in the modify box

Was this helpful?

Very bad Very Good

Related topics

How to set up Wireless LAN on Zyxel P660HN-T1A How to set up DDNS on Zyxel P660HN-T1A