Set up Dynamic DNS for GCOM GN2000-04GS-2VT

  1. Type and press Enter , type Username = admin, Password = password then press Login
  2. On the top, select Advanced Setup > Dynamic DNS
  3. Check the setting as follows:
    • Dynamic DNS State : select Enable
    • Select Dynamic Server : choose Dynamic DNS as per applied
    • Username : enter Username as per applied for Dynamic DNS (Host)
    • Password : enter Password as per applied for Dynamic DNS (Host)
    • Host Name : enter the Host Name
    • Press Apply, setup information will be shown in below table

Was this helpful?

Very bad Very Good