Set up LAN on AP FiberHome SR120-A

  1. Open a Browser, type and press Enter (User = admin, Password = enter letters as shown below)
  2. Status page, choose More
  3. Go to Network Settings
  4. IPV4 Settings : 
    • LAN IP address : IP Address of AP
    • DNS : 
    • Use DNS Relay : auto obtain DNS from main Modem
    • Set Manually : manually set DNS
    • DHCP Server : enable / disable DHCP (enable = blue, disable = grey)
    • IP Address Range : start IP Address and last IP Address that AP auto share
    • DHCP Lease Time : set time for AP to share new IP Address, unit is second
    • When completed, press Save

Was this helpful?

Very bad Very Good