How to solve Problem Skyworth GN542VF setup with True DDNS and IP Camera
Check IP Address and Port of IP Camera to set Port forwarding at Router
- Check the setting at DVR that's the center to record data from all cameras in house (ex. Watashi IP Camera)
- Type IP Address of DVR at Browser, Ex. 192.168.1.108 then press Enter
- Enter Username and password of DVR then press Log in
- in case you don’t know IP Address, Username and password of DVR, ask the technician who installed DVR
- Check IP Address, go to Setting > Network > TCP/IP > IP Address of DVR : 192.168.1.108
- Check Port, go to Setting > Network > Connection, mostly used Ports :
- TCP Port : 37777 (Port to view camera via Application on Smart Phone)
- HTTP Port : 81 (Port to view camera via Web Browser)
Set up TrueDDNS
- Type https://trueddns.com/login at Browser then press Enter
> Login by using registered Username and password then press Log in - Select service management
- pairing Port to align with DVR
- Port 11000 : set TCP name to be the same as TCP Port of DVR, click a behind button to turn ON
- Port 11001 : set HTTP name to be the same as HTTP Port of DVR, click a behind button to turn ON
- When finished, press Confirm
3. Use Port number received from TrueDDNS to enter in replace of old Port number of DVR then press Save
Port Forwarding Setup at Router
- Type 192.168.1.1 > Username = admin, Password = password = enter letters as shown below then press Login
- Go to Application > NAT > go down
- Go to Port Forwarding Virtual Server, there’re 2 setup parameters:
- View via App on Smart Phone
- Interface : select 1_TR069_INTERNET_R_VID_100
- select Custom Service
- Protocol : select preferred Protocol
- External Start / End Port : 11000
- Internal Port : 11000
- Internal IP Address : 192.168.1.108
- Mapping Name : enter name
- press Add
- View via Web Browser
- Interface : select 1_TR069_INTERNET_R_VID_100
- select Custom Service
- Protocol : select preferred Protocol
- External Start / End Port : 11001
- Internal Port : 11001
- Internal IP Address : 192.168.1.108
- Mapping Name : enter name
- press Add
- View via App on Smart Phone
- After setting, it’ll show in a below table (number of Port Forwarding depends on using device, may have only 1 port or more)
Disable DDNS setting at Router
- Go to Application
- click DDNS
- Click a check at Profile you want to delete
- press Delete
Disable DDNS setting at DVR
- Go to Setting > DDNS
- Remove a check mark
- press Save
Test the usage through Mobile Internet or Internet that is different from at home
- Test IP Camera App on Smart Phone by using Domain name and Port number from True DDNS, if the setting is correct, you’ll see pictures from camera
- Test the usage via Web : enter Domain name followed by Port number from TrueDDNS Ex. eddie555.trueddns.com :11001 , If the setting is correct, you can access web page of IP Camera