How to set up WDS for Cisco EPC2425

Main Router and Site Router settings

  1. SSID : same
  2. Channel : same
  3. Wireless Security : same
  4. Wireless Bridging : Enabled
  5. Remote Bridges : Main Router enter MAC Address of Site Router and at Site Router enter MAC Address of Main Router
  6. IP LAN : change at Site Router to avoid duplicated IP
  7. DHCP : Disable at Siter Router

How to search Wireless MAC Address of each Router

  1. Open a Browser and type > at Login page, click OK (There might be a problem when logging in using Safari, try using another browser)
  2. Click at Status and note the value of Wireless Primary Interface, enter Wireless Primary Interface of Main Router in Site Router and enter the value from Site Router in Main Router

How to turn on Wireless Bridging and enter MAC Address

  1. Goto Setup -> Wireless -> Bridging
  2. At Wireless Bridging, select Enabled
  3. At Remote Bridges, enter MAC Address of Router for WDS support e.g. 1a:2b:3c:4d:5e:6f and click Apply

How to change IP LAN at Site Router

  1. Go to Setup -> Network Configuration
  2. Edit the last digit e.g. cahnge to and click Apply

How to disable DHCP at Site Router

  1. Setup -> LAN IP Address Management
  2. Click No at DHCP and click Apply

Was this helpful?

Very bad Very Good