Set up Wi-Fi 2.4GHz or 5.0GHz for True IoT Pocket WiFi Smart1

  1. Connect device to Wi-Fi of True IoT Pocket WiFi Smart1 (check Wi-Fi name and password  from a sticker at the back of device)
  2. Open a web browser e.g. IE or Chrome then type : and press Enter
  3. Login page, enter the Password = password then press Login
  4. Configuration Page of True IoT Pocket WiFi Smart1
  5. Go to (Settings) > (Wi-Fi Settings) > (Advance Settings) 
    • Band Selection = choose 2.4GHz or 5.0GHz
    • Network Mode = choose 802.11 b/g/n or 802.11 n
    • Channel Bandwidth = choose between 20MHz and 20MHz/40MHz (default)
    • Country/ Region Code = choose Thailand (default)
  6. Once completed, press (Apply)
  7. Wait for a while, a pop up “all connected device must re-connect Wi-Fi” > press Yes to confirm
  8. When finished, “Success” will appear on screen

Was this helpful?

Very bad Very Good