Set up Wireless for HUMAX HV100-02
Login process
- Type 192.168.1.1 in the Address bar on Browser then press Enter, type Username = admin, Password = password then press Login
Set up Wireless 5G on the left, select SETUP > Wireless 5G
- Set up BASIC SETTING
- Select Wireless 5G and press Wireless Settings or drag Mouse pass Wireless 5G and choose Basic Setting
- Set up as follows:
- Enable: enable/ disable (tick a check mark to choose)
- SSID: enter network name
- Wireless Channel: select Channel as desired (starting from Auto)
- Wireless Mode: select mode as desired (starting from 5GHz(A+N+AC))
- Once completed, press Apply
- Set up SECURITY SETTING
- Select Wireless 5G and press Wireless Settings or drag Mouse pass Wireless 5G and choose Security Setting
- At Security Mode, choose mode as follows:
- WPA / WPA2+TKIP / AES
- None
- WEP once finished, press Apply
- Set up ADVENCED SETTING
- Select Wireless 5G and press Advanced Setting or drag Mouse pass Wireless 5G and choose Advanced Wireless
- Set up as follows:
- SSID Advertise : display SSID / hide SSID (tick a check mark to choose)
- Once completed, press Apply
- Set up WIRELESS MAC FILTER
- Select Wireless 5G and press MAC Filter or drag Mouse pass Wireless 5G and choose Wireless MAC Filter
- Set up as follows:
- MAC Restrict Mode : (Disable = turn off) / (Deny = not allow specified MAC Address able to use) /(Allow = allow specified MAC Address able to use)
- Enter MAC Address then press Add, it’ll show MAC Address numbers in MAC Address List
- Set up WPS SETTING
- Select Wireless 5G and press WPS Setting or drag Mouse pass Wireless 5G and choose WPS Setting
- Set up as follows:
- BASIC SETTING
- Enable WPS : enable/ disable (tick a check mark to choose)
- Device Password (PIN) : enter PIN in the connected device
- ADD CLIENT
- Setup Methods : (Push Button : press WPS button at Router to connect device) / (PIN : enter PIN in the connected device) *use only with Security type: WPA-PSK, WPA2 PSK*
Set up Wireless 2.4G on the left select SETUP > Wireless 2.4G
- Set up BASIC SETTING
- Select Wireless 2.4G and press Wireless Settings or drag Mouse pass Wireless 2.4G and choose Basic Setting
- Set up as follows:
- Enable: enable/ disable (tick a check mark to choose)
- SSID: enter network name
- Wireless Channel: select preferred Channel (starting from Auto)
- Wireless Mode: select preferred Mode (starting from 2.4GHz(B+G+N))
- Once completed, press Apply
- Set up SECURITY SETTING
- Select Wireless 2.4G and press Security Setting or drag Mouse pass Wireless 2.4G and choose Security Setting
- At Security Mode and choose Mode
- WPA / WPA2+TKIP / AES
- None
- WEP when finished, press Apply
- Set up ADVENCED SETTING
- Select Wireless 2.4G and press Advanced Setting or drag Mouse pass Wireless 2.4G and choose Advanced Wireless
- Set up as follows:
- SSID Advertise : display SSID / hide SSID (tick a check mark to choose)
- Once completed, press Apply
- Set up WIRELESS MAC FILTER
- Select Wireless 2.4G and press MAC Filter or drag Mouse pass Wireless 2.4G and choose Wireless MAC Filter
- Set up as follows:
- MAC Restrict Mode : (Disable = turn off) / (Deny = not allow specified MAC Address able to use) /(Allow = allow specified MAC Address able to use)
- Enter MAC Address then press Add, it’ll show MAC Address numbers in MAC Address List
- Set up WPS SETTING
- Select Wireless 2.4G and press WPS Setting or drag Mouse pass Wireless 2.4G and choose WPS Setting
- Set up as follows:
- BASIC SETTING
- Enable WPS : enable/ disable (tick a check mark to choose)
- Device Password (PIN) : enter PIN in the connected device
- ADD CLIENT
- Setup Methods : (Push Button Push Button : press WPS button at Router to connect device) / (PIN enter PIN in the connected device) *use only with Security type: WPA-PSK, WPA2 PSK*