Set up LAN on AP FiberHome HG180Ev2

  1. Type 192.168.2.1 in URL and enter Username : admin / Password : enter letters from below picture then press Login
  2. Basic Setup > LAN > IPv4 Configuration
    • IP Address : Default Gateway and it’s used to configure AP
    • Set Manually : set DNS values manually (default: Use DNS Server)
    • Start(PC) : Start IP that AP share to other device connected to DHCP network
    • END(PC) : End IP that AP share to other device connected to DHCP network
    • Press Apply to save the settings
    • If want to add more device to get DHCP, must change numbers at Start and End
    • Example Start : 192.168.2.33 , End : 192.168.2.64 = 32 devices
    • if change to Start : 192.168.2.33 End : 192.168.2.100 = 68 devices
Download File

Was this helpful?

Very bad Very Good