Port Forwarding on T3 ST-244F

  1. Type 192.168.1.1 and press Enter, User = admin /Password = enter letters shown below, and press Login 
  2. At Status, select Firewall
  3. Go to Port Forwarding
  4. Set up as follows:
    • Port Forwarding : choose Enable
    • Comment : enter name
    • Local IP : enter IP Address of device to forward port
    • Local Port From & Local Port To : enter Port number of device to forward port
    • Protocol : choose preferred Protocol
    • Remote Port From & Remote Port To : enter Port number to Forward
    • Interface : choose Any
    • press Add
    • press Apply Change
    • Setup information will be shown in below table

Was this helpful?

Very bad Very Good