Set up APN on True IoT Router WiFi

  1. Connect Wi-Fi to True IoT Router WiFi
  2. Once successfully connected Wi-Fi, open a browser and enter URL: http://192.168.0.1
  3. A login page to enter Username = admin / Password = password and press Login
  4. Configuration Page of True IoT Router WiFi
  5. Check APN
    • Disconnect the internet : on top choose (Home) > (Disconnect)
    • On top choose (Settings) > (Network Settings) > (APN)
    • Check the settings as follows:
      • Current APN = TRUE-H INTERNET : default
      • Mode = Auto / Manual : auto by default
      • Profile : can choose other set profile (1 profile by default)
      • PDP Type = IPv4 / IPv6 / IPv4v6 : IPv4 by default
      • Profile Name = TRUE-H INTERNET
      • APN = internet
      • Authentication = PAP / CHAP / NONE : PAP by default
      • User Name = true
      • Password = true
  6. Add APN
    • At (Mode) > choose (Manual) > (Add New)
    • Set up APN as follows:
      • Profile:  can choose other set profile (1 profile by default)
      • PDP Type = IPv4
      • Profile Name = Test1 (or any name)
      • APN = internet
      • Authentication = PAP
      • User Name = true
      • Password = true
      • Press (Apply) to save the setting
    • At (Mode) > choose (Manual)
    • Select (Profile Name) > set profile will appear > choose this name > Set as default
    • System will save selected profile as default
  7. Delete APN
    • Press at Profile (cannot delete default profile or using profile)
    • Select profile to delete
    • At that profile > press (Delete)
    • A pop up to confirm deletion, press (Yes)

Was this helpful?

Very bad Very Good

Related topics

Reset to Factory Settings on True IoT Router WiFi Change Mode on True IoT Router WiFi Home Page Info on True IoT Router WiFi Log in Configuration Page for True IoT Router WiFi Connect Wi-Fi on Windows 10 to True IoT Router WiFi